Berkshire Hathaway EWM Realty.
Adelaida “Ady” M. Artime, P.A., Berkshire Hathaway EWM Realty.Phone: (786) 512-2467
Email: [email protected]

Replace Your Toilet in 3 Simple Steps

by Adelaida “Ady” M. Artime, P.A. 12/13/2020

Photo by Edgardo Lagmay on Unsplash

Nothing dates a bathroom like an old toilet. Not only have toilets advanced significantly in the past 10-15 years. Older toilets often develop hard water stains and porcelain scratches that show their age.

Fortunately, replacing a toilet is one of the most straightforward home improvement projects you can do. And it's relatively inexpensive for a DIY toilet replacement. Here's how it's done.

What You'll Need

  • A new toilet. *Pro tip* Read reviews and find one with the feature you like. Toilets are similar sizes, but you should measure from the wall to the bolt to ensure the bolts are in the right place for your new toilet.
  • Rubber work gloves
  • Putty knife
  • Sponge
  • Hacksaw 
  • Wrenches
  • Towel
  • Nuts/Bolts
  • Closet flange
  • Washers
  • Wax ring
  • Garbage bag
  • Some of these items will come with a toilet. So see what's in the box before you buy separately.

    Remove the Old Toilet

    Before you do, turn off the water supply on the wall behind the toilet. Flush the toilet to empty the remaining water. Then while wearing gloves, use your sponge and towel to sop up any liquid left behind in the bowl and the tank behind the bowl.

    If the toilet's tank can separate from the bowl, remove it first for a lighter lift. You only need the hack saw if the bolts are rusted solid. Otherwise, you just need a wrench. 

    Put the dirty toilet in a big plastic bag and take it outside for now.

    Remove Old Wax

    Stick an old hand towel gently into the mouth of the hole left behind to block sewer gasses floating into your house. *Pro tip* Don't use a washcloth. You may lose it. If it falls down your drain, you may need a plumber to get it out.

    Next, use your putty knife to carve out the old wax around the hole in the floor. It's soft, so this is easy on the hands, but it may take a little while to dig it all out.

    Remove the old closet bolts and the flange if needed. They're cheap to replace.

    Install the New Flange, Bolts & Wax Ring

    Lay down your new flange and place your bolts pointing up. These will secure the base of your toilet. Tightening down washers over the bolts holds the bolts in place, so it will be easier to slide your toilet over the top.

    Next, soften the wax ring with warm water. And then fit it around the drain on the underside of the toilet. Don't forget to remove the towel from the pipe before going further.

    Lower Your Toilet into Place

    Carefully lower the bowl of the toilet over the bolts. Press down firmly to strengthen the wax seal. Then fasten the bolts on the bowl and tank. Hook up the water, tighten, and watch as the tank fills ready to shut it off the hose leaks. Tighten it.

    And you've just replaced your toilet. Don't forget to follow our blog for more helpful home tips.

    About the Author
    Author

    Adelaida “Ady” M. Artime, P.A.

    In her role as a real estate and relocation specialist in South Florida and Northern Virginia, Ady Artime prides herself on providing the highest level of service, confidentiality and professionalism to her clients. Based on her own experience as a government liaison, Ady is in familiar territory working with high powered individuals. She possesses a discreet and confidential work ethic, and her keen eye, attention to detail, and experience with multi-million dollar properties have earned her a high-profile, loyal clientele that expect the best from their realtor.

    Known for her expertise and strong background in interior design, she stands out from other real estate agents. When a satisfied client says that Ady knows real estate "inside and out", the statement is to be taken literally. Over the course of her career, she has received recognition as an award-winning interior designer. She has designed and implemented interiors for countless luxury projects throughout the United States, and Europe. Her extensive knowledge of all facets of design, including working with architects and construction teams, led to a natural progression into the real estate arena and gives her a definite edge over the competition in serving her clients.

    As and agent in South Florida and North Virginia, Ady lends her real estate expertise and design savvy to buyers and sellers. Ady's mission is to develop a faithful, repeat clientele by providing them with superior service and value. She is passionate about her work and takes the time to understand each client's needs and goals to accurately assess the options she provides. From overseeing the staging of a listed property in order to fetch the highest possible price to analyzing a potential purchase from a design and architectural perspective.